Wireless Calling System - LED Display Server - JX1001 - Shopping Guide, Reviews, Compare Price & Free Shipping

Wireless Calling System Overview:

Wireless Calling System - LED Display Server (JX1001) - this is for receiving the calling signal and showing the calling number. It can hold up 250 calling buttons. Moreover, it has memory chipset which can store up to 15 calling numbers in the memory and these calling numbers will be auto scroll display every 3 seconds. It will send out the prompt tone and high light the table number once get the new signal. You can fix the server with ease. You can place it on the cashier, reception desk or hang on the wall or ceiling. You can adjust the bottom for displaying in a proper angle. The system supports both alphabet and numeric displaying. This will be much convenient for you to know which area the calling button is from. You can also use multiple servers at the same time. They will work without affect each other. The enhanced receiving circuit can receive the long-distance signal or the signal stepping over several floors.

Wireless Calling System Specifications:

• Screen Size: 1.8 inch
• Display: 1 letter + 2 digitals
• Capacity: 250 calling buttons
• Memory capacity: can hold up 15 incoming calls
• Display Mode: auto roll display
• Decoding Type: registration method
• Dimension: 140x78x33(mm)
• Power supply: 100V~240V 50~60Hz
• Frequency: 315MHz Accessories:
• Power adaptor: 12V DC stabilized supply (1unit)
• Server controller: Since the system is decoded by the register method, you can use this controller to set calling number for each calling button by yourself. You can also use it to check (PAGEUP/PAGEDOWN) or delete the calling numbers in the memory. (1unit)

What is this Wireless Calling System for?

If you are opening this kind of business, there are many customers, sometimes, you will need service like ordering food or drinks. However, you don’t want to hire many waiters to serve them. Your needs is very simple. You just want to be informed once your customer need service. Usually, your customer might need at the same time, then you will need remember their table numbers and go to serve them one by one. Wireless Calling System - JX1001 is very suitable for your business. This system is very easy to operate and will not cost much money. Wireless Calling System - JX1001 can hold up to 250 calling buttons. It also has memory chipset. When there are several customers are calling services together, Wireless Calling System - JX1001 will store their numbers into memory and display them one by one. It can store up to 15 calling numbers in the memory. You can use the controller to check the calling number in the memory. This system is modulated by frequency. The signal can be received over several floors or partitions. It can be transferred in 500M in the open area. It also can cycle display the calling numbers in the memory. You do not need to check them manually. For the served calling numbers, it can be deleted with the controller. Wireless Calling System - JX1001 is a wireless system which can be set up easily.

Wireless Calling System Components

The system is composed of LED display server, server controller and calling buttons.

LED Display Server - JX1001

This is for receiving the calling signal and showing the calling number. It can hold up 250 calling buttons. Moreover, it has memory chipset which can store up to 15 calling numbers in the memory and these calling numbers will be auto scroll display every 3 seconds. It will send out the prompt tone and high light the table number once get the new signal. You can fix the server with ease. you can place it on the the cashier, reception desk or hang on the wall or ceiling. You can adjust the bottom for displaying in a proper angle.The system supports both alphabet and numeric displaying. This will be much convenient for you to know which area the calling button is from. You can also use multiple servers at the same time. They will work without affect each other. The enhanced receiving circuit can receive the long-distance signal or the signal stepping over several floors.

LED Display Server Controller (including in LED Display Server)

Since the system is decoded by the register method, you can use this controller to set calling number for each calling button by yourself. You can also use it to check (PAGEUP/PAGEDOWN ) or delete the calling numbers in the memory.

Calling Buttons

Noble and elegant style, standard menu-stand transmitter for professional service industry. It is more convenient for you to show the menu or advertisement via the accessory plastic plate. It's waterproof and easy to change the batteries and maintain. It adopts SAW device which is specified for airline communication, it will guarantee the signal transmit stable. Anti-mixed channel inside can make sure the number won't be in the mess. The transmitter in the menu stand resist the temperature changing and humid changing. It is safe, stable and reliable. The long-distance signal can also be received by the receiver via the exterior antenna. The lifetime of the battery is more than one year with the saving energy design.

Wireless Calling System - How does the system fit your needs

Arrange the calling number for calling buttons in different place

The system supports both alphabet and numerical displaying. So you can arrange the calling numbers according to your calling buttons' positions. In this case, you can know the calling from which area immediately.

If you have a large area and you divide it into several small areas, like Area A, Area B, Area C. You can set different alphabet number for calling buttons in different area.

• For the calling buttons in Area A, you can set the calling number from alphabet A. You can set them like following A01, A02, A03.
• For the calling buttons in Area B, you can set the calling number from alphabet B. You can set them like following B01, B02, B03.
• For the calling buttons in Area C, you can set the calling number from alphabet C. You can set them as this C01, C02, C03.

If you use it in a building, you can arrange the calling buttons for different floors.You can set different alphabet number for calling buttons in different floors.

• For the calling buttons in ground floor, you can set the calling number from alphabet A. You can set them as following A01, A02, A03.
• For the calling buttons in first floor, you can set the calling number from alphabet B. You can set them as following B01, B02, B03, B04, B05.

Arrange the system in different mode

You can arrange the system in three modes: Multiple calling buttons to One calling server; One calling button to Multiple calling servers; Multiple calling buttons to Multiple calling servers.

Multiple calling buttons to One calling server - All calling button signals will be received by one server.

One calling button to multiple calling servers - One button signal will be received by two or more servers.

Multiple calling buttons to multiple calling servers - Two or more servers can be used at the same time without conflict. You can set server for each floor and calling buttons in different floor will be sent to its corresponding server.

Wireless Calling System - How does the system work?

When you press the first calling button (we suppose the calling number is A01), the server will show the calling number immediately.

When you press the second calling button (we suppose the second calling number is A02), the server will show the second calling number immediately and store the first calling number into the memory.

When you press the third calling number (we suppose the third calling number is A03), the server will show the third calling number at once and store the second calling number into the memory.

Now the memory is stored these number according to the calling order. A01->A02 ->A03
The server will cycle display and tone prompts the calling-in numbers in every 3 seconds. A01-> A02-> A03-> A01-> A02-> A03

If you press any of above calling buttons again, the number won't be added into the memory but just show that number again and change its queue number in the memory. In this case, if your customer presses the calling number continuously, the server will show the same number outstandingly immediately, the server memory won't keep the same number repeatedly but just at the different sequence to show it on the server.

For example, the calling number A02 is called again, then the server will not add it into the memory but show A02 at once change its order in the memory to set A02 after A03, and then the order will be A01->A03->A02

It will cycle display in this way. A01->A03->A02-> A01->A03->A02

The server memory can hold up to 15 calling numbers

If you call the 16th calling number, the first calling number (the earliest one A01) will be deleted automatically.

You can also use the wireless controller to check or delete the calling number manually.

If you use the menu calling button with 2 keys, your customer can cancel the service by themselves.

Need more information on Wireless Calling System?

Click here for Wireless Calling System live demo

≡ E-instruction Book Download ≡

The E-instruction Book Uses Foxit PDF Reader. Please Use Acrobat 5.0 Or The Updated Version

Reading Online《User Guide》

Free Downloads《User Guide》